THE TRANSCRIPTOR SKELETON UNIVERSAL TURNTABLE
THE TRANSCRIPTOR SKELETON UNIVERSAL TURNTABLE EMPLOYS A
LOW SPEED SYNCHRONOUS MOTOR ON A SPRING-SUSPENSION MOTOR
BOARD. THE PLATTER IS DRIVEN BY A RUBBER BELT PROVIDING THE
BEST INSULATION AGAINST VIBRATION AND RUMBLE. IN ORDER TO
ELIMINATE ANY MECHANICAL OR ELECTRICAL SHOCK TO THE
EQUIPMENT, THE ON-OFF SWITCHING IS ACCOMPLISHED BY MEANS OF A
MAGNETICALLY ACTUATED REED SWITCH WHICH ASSURES LONG
TROUBLE-FREE LIFE.
SPECIFICATIONS
TRANSCRIPTOR SKELETON UNIVERSAL TURNTABLE:
Platter: 12" (305mm) Diameter, Cast and Machined.
Aluminum Alloy, with 5 silver-plated weights,
approximately 6.5 pounds.
Main Bearing: Slim section ball-ended ground and polished
steel, supported on a hardened steel thrust
plate. Bushing coated with P.T.F.E.
(Polytetrafluoroethylene) A material having a
lower co-efficient of friction than any other
solid.
Motor: 10 Pole Synchronous, Split-Phase, 720 R.P.M.
Power: 117 Volt A.C., 60 HZ .038 A
Wow & Flutter: .05%
Speeds: 33
1
/
3
and 45 r.p.m.
Rumble: NIL
Dimensions: 18" wide x 15
1
/
2
" deep, x 7” high.
- 5 -
To Next Page
Loading...