10-1.3 Status
After you complete the IGMP Snooping configuration, you can view the IGMP Snooping
Status. This page displays the IGMP Snooping detail status.
Web Interface
To display the IGMP Snooping status in the web interface:
1. Click Multicast, IGMP Snooping, and Status.
2. To auto-refresh the information, set “Auto-refresh” to On.
3. Click “Refresh” to refresh the IGMP Snooping Status.
Figure 10-1.3: IGMP Snooping Status
Parameter descriptions:
Statistics
VLAN ID: The VLAN ID of the entry.
Querier Version: Working Querier Version currently.
Host Version: Working Host Version currently.
Querier Status: Shows the Querier status is "ACTIVE" or "IDLE". "DISABLE" denotes the specific
interface is administratively disabled.
Queries Transmitted: The number of Transmitted Queries.
Queries Received: The number of Received Queries.
V1 Reports Received: The number of Received V1 Reports.
V2 Reports Received: The number of Received V2 Reports.
V3 Reports Received: The number of Received V3 Reports.
V2 Leaves Received: The number of Received V2 Leaves.
To Next Page
Loading...