10-2.4 Groups Information
The section describes user could set the MLD Snooping Groups Information. The "Start from
VLAN", and "group" input fields allow the user to select the starting point in the MLD Group
Table.
Web Interface
To display the MLD Snooping Group information in the web interface:
1. Click Multicast, MLD Snooping, and Group Information.
2. To auto-refresh the information select ”on” at “Auto-refresh”.
3. Click “Refresh” to refresh an entry of the MLD Snooping Group Information.
Figure 10-2.4: MLD Snooping Groups Information
Navigating the MLD Group Table: Each page shows up to 99 entries from the MLD Group table,
default being 20, selected through the "entries per page" input field. When first visited, the web page
will show the first 20 entries from the beginning of the MLD G ro u p Tab le .
Parameter descriptions:
VLAN ID: VLAN ID of the group.
Groups: Group address of the group displayed.
Port Members: Ports under this group.
Show entries: Choose how many items you want to view per page.
Buttons
Auto-refresh: Check to refresh the page automatically every 3 seconds.
Refresh: Click to refresh the page immediately.
To Next Page
Loading...