Chapter 3 - System
This chapter describes the basic configuration tasks including System Information and certain System
parameters (e.g., IP, Advanced IP, Time, Account, IP, Syslog, and NTP.)
3-1 System Information
You can identify the system by configuring system name, location, and contact information.
Additional switch-related information is also provided here.
Web interface
To configure System Information in the web interface:
1. Click System and System Information.
2. Enter System Name, Location, and Contact information (optional).
3. Click the Apply button.
Figure 3-1: System Information (SM8TAT2SA shown)
Parameter descriptions:
Model Name: the specific switch model number (i.e., SM8TAT2SA, SM16TAT2SA, or SM24TAT2SA).
System Description: e.g., Smart Managed Switch, 16-port Gigabit PoE+, 2-port 100/1000 SFP.
Hardware Version: e.g., v1.00.
Mechanical Version: e.g., v1.00.
Firmware Version: the current running version of switch firmware (e.g., v1.01.1209).
MAC Address: the switch MAC Address (e.g., 00-40-C7-1C-CB-6E).
Serial Number: the switch S/N (e.g., C021316AR3300004).
System Name: An administratively assigned name for this managed node. By convention, this is the
node's fully-qualified domain name. A domain name is a text string drawn from the alphabet (A-Z, a-z),
digits (0-9), minus sign (-). No space characters are permitted as part of a name. The first or last
character must not be a minus sign. The allowed string length is 0 to 128 characters.
Location: The physical location of this node (e.g., telephone closet, 3rd floor). The allowed string
To Next Page
Loading...