12-2.2 Status
The section describes how to show the each port 802.1X status information of the switch.
The status includes Admin State, Port State, Last Source, Last ID and Port VLAN ID.
Web Interface
To displays 802.1X Status in the web interface:
1. Click Security, IEEE 802.1X, Status.
2. Check “Auto-refresh” if desired.
3. Click “Refresh” to refresh the port detailed statistics.
4. You can select which port that you want display 802.1X Statistics.
Figure 12-2.2: IEEE 802.1X Status
Parameter descriptions:
802.1X Status
Port: The switch port number. Click to navigate to detailed 802.1X statistics for this port.
Admin State: The port's current administrative state. Refer to 802.1X Admin State for a description of
possible values.
Port State: The current state of the port. Refer to 802.1X Port State for a description of the individual
states.
Last Source: The source MAC address carried in the most recently received EAPOL frame for
EAPOL-based authentication, and the most recently received frame from a new client for MAC-based
authentication.
Last ID: The user name (supplicant identity) carried in the most recently received Response Identity
EAPOL frame for EAPOL-based authentication, and the source MAC address from the most recently
received frame from a new client for MAC-based authentication.
Port VLAN ID: The VLAN ID that 802.1X has put the port in. The field is blank, if the Port VLAN ID is
not overridden by 802.1X.
If the VLAN ID is assigned by the RADIUS server, "(RADIUS-assigned)" is appended to the VLAN ID.
To Next Page
Loading...