Transition Networks SM8TAT2SA - IP Status

3-2.2 IP Status
This page displays the status of the IP protocol layer. The status is defined by the IP interfaces,
the IP routes and the neighbor cache (ARP cache) status.
Web Interface
To display the log configuration in the web interface:
1. Click System, IP Address, and Status.
2. View the IP Configuration information.
Figure 3-2.2: The IP Status page
Parameter descriptions:
IP Interfaces
Interface: Shows the name of the interface (e.g., OS:lo or VLAN1).
Type: Shows the address type of the entry. This may be LINK or IPv4 or IPv6.
Address: Shows the current address of the interface (of the given type; e.g., 192.168.1.77/24 or ::1/128
or 00-40-C7-1C-CB-6E).
Status: Shows the status flags of the interface (and/or address). For example: UP LOOPBACK RUNNING
MTU:16436 Metric:1 or UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1, or Manual, or Link
Local Address.
IP Routes
Network: Shows the destination IP network or host address of this route (e.g., 192.168.1.0/24).
Gateway: Shows the gateway address of this route (e.g., 192.168.1.254 or ::).
Status: Shows the status flags of the route (e.g., UP or UP GATEWAY).