RMON History Configuration
Navigate to Switch > Security > RMON > History > Configuration to display the RMON History
Configuration page:
Parameters:
ID: Indicates the index of the entry. The valid range is 1 to 65535.
Data Source: Indicates the port ID which you want to be monitored with RMON.
Interval: Indicates the interval in seconds for sampling the history statistics data. The valid range is 1 to
3600. The default value is 1800 seconds.
Buckets: Indicates the maximum data entries associated this History control entry stored in RMON.
The valid range is 1 to 3600. The default value is 50. This is the RMON “buckets requested’ value - the
requested number of discrete time intervals over which data is to be saved in the part of the
media-specific table associated with this historyControlEntry. When this object is created or modified,
the probe should set historyControlBucketsGranted as closely to this object as is possible for the
particular probe implementation and available resources. The default is 50.
Buckets Granted: The number of data saved in the RMON. The number of discrete sampling intervals
over which data will be saved in the part of the media-specific table associated with this
historyControlEntry.
See the RMON RFC (IETF RFC 2819) for details on the particular probe implementation and available
resources.
To Next Page
Loading...