RMON Event Configuration
Navigate to Switch > Security > RMON > Event > Configuration to display the RMON Event
Configuration page:
Parameters:
ID: Enter the index of the RMON event. The valid range is 1 to 65535. Each ID entry must be unique.
Desc: Indicates this event, the string length is 0 to 127. The default is a null string.
Type: Indicates the notification of the event, the valid types are:
none: No logging action is performed.
log: A syslog entry is added.
snmptrap: An SNMP trap event is sent.
logandtrap: A syslog entry is logged and an SNMP trap event is sent.
Community: Specify the community when a trap is sent; the string length is 0 to 127 characters. The
default is "public".
Event Last Time: Indicates the value of sysUpTime at the time this event entry last generated an event
(e.g., 33554560 or 33 days, 55 hours, 45 minutes, and 50 seconds).
RMON Event Status
Navigate to Switch > Security > RMON > Event > Status to display the RMON Event Status page:
Parameters:
Event Index: Indicates the index of the event entry.
LogIndex: Indicates the index of the log entry.
LogTIme: Indicates the time that the Event was logged.
LogDescription: Indicates the Event description.
To Next Page
Loading...