3-3 System Time
The switch provides manual and automatic ways to set the system time via NTP. For manual
setting, enter the “Year”, “Month”, “Day”, “Hour” and “Minute” within the valid value range
indicated for each item.
Web Interface
To configure Time in the web interface:
1. Click System and System Time.
2. Specify the Time parameters.
3. Click Apply.
Figure 3-3: The Time Configuration page
Parameter descriptions:
Time Configuration
Clock Source: There are two modes for configuring how the Clock Source from. Select "Local Settings" :
Clock Source from Local Time. Select "NTP Server" : Clock Source from NTP Server.
System Date: Show the current time of the system. The year of system date must be 2000 - 2037.
Time Zone Configuration
Time Zone: Lists various Time Zones worldwide. Select appropriate Time Zone from the drop down
and click Apply to set.
Acronym: You can set the acronym of the time zone. This is a user configurable acronym to identify the
time zone (range: up to 16 characters).
To Next Page
Loading...