14-1.4 Activate config
It is possible to activate any of the configuration files present on the switch, except for
running-config which represents the currently active configuration.
Select the file to activate and click. This will initiate the process of completely replacing the
existing configuration with that of the selected file.
Web Interface
To activate configuration in the web interface:
1. Click Maintenance, Configuration, and Activate Configuration.
2. Select the File Name to be activated.
3. Click the Activate Configuration File button.
Figure 14-1.4: Activate Configuration
Parameter descriptions:
Activate: Click to activate the selected file.
Buttons
Activate Configuration File: Click the button then the selected file will be activated and will become
this switch's running configuration.
To Next Page
Loading...