Transition Networks SM8TAT2SA - Delete Config

14-1.5 Delete config
It is possible to delete any of the writable files stored in flash, including startup-config. If this
is done and the switch is rebooted without a prior save operation, this effectively resets the
switch to its default configuration.
Web Interface
To delete configuration in the web interface:
1. Click Maintenance, Configuration, Delete config.
2. Click Delete Select.
Figure 14-1.5: Delete Configuration
Parameter descriptions:
Delete: Select the file that you want to be deleted.
Buttons
Delete Configuration File: Click the button then the selected file will be deleted.