14-2 Restart Device
This section describes how to restart switch for any maintenance needs. Any configuration files
or scripts that you saved in the switch should still be available afterwards.
Web Interface
To configure a Device Restart in the web interface:
1. Click Maintenance and Restart Device.
2. Click Yes.
Figure 14-2: Restart Device
Parameter descriptions:
Restart Device: You can restart the switch on this page. After restart, the switch will boot normally.
Buttons
Yes: Click “Yes” to restart the device.
No: Click to undo any restart action and return to the System Configuration page without restarting
the configuration.
To Next Page
Loading...