14-3 Factory Defaults
This section describes how to reset the Switch configuration to Factory Defaults. Any
configuration files or scripts will recover to factory default values.
Web Interface
To reset the switch configuration to its Factory default settings in the web interface:
1. Click Maintenance and Factory Defaults.
2. Check the box if you want to keep the current IP configuration.
3. Click Yes.
Figure 14-3: Restore Config to Factory Defaults
Buttons
Keep IP Configuration: Check if you want to keep the current IP address configuration after the
restore is completed.
Yes: Click the “Yes” button to reset the configuration to Factory Defaults.
No: Click to undo any restore action and return to the System Configuration page without restoring the
configuration.
To Next Page
Loading...