14-4.1 Firmware Selection
This page lets you activate an alternate firmware image. This page provides information about the
active and alternate (backup) firmware images in the device, and allows you to activate the alternate
image. The web page displays two tables with information about the active and alternate firmware
images. Navigate to the > Maintenance > Firmware > Firmware Selection menu path to display the
Firmware Selection page.
Parameters:
Active Image
Partition: e.g., “primary” firmware image. Indicates whether primary or secondary partition in the flash
is used for storing the firmware image.
Version: The active firmware version (e.g., v1.01.1195).
Date: The active firmware build date (2017-10-26 18:54:45 UTC).
Alternate Image
Partition: e.g., “secondary” firmware image.
Version: The alternate firmware version (e.g.,
v0.94.690).
Date: The alternate firmware build date (e.g., 2017-09-19 12:41:12 UTC).
Buttons:
Activate Alternate Image: Click the button to activate the Alternate Firmware image.
Cancel: Click to cancel the page edits.
To Next Page
Loading...