Transition Networks SM8TAT2SA - I Cons; C Ontrols

Topology View Icons / Controls
Click anywhere and drag to move the display area up /down/ left /right.
Click “+” or “-” to zoom in or zoom out the display area.
A Black device icon indicates device is operating normally. Click a device
icon to show its device console.
A Red device icon indicates the device is operating abnormally.
A Red circled device number shows the number of alarm notifications
for the device.
Click this icon to select the set of information to be displayed (MAC, IP,
PoE power, etc.).
Click this icon to sort, filter, or configure basic settings (e.g., VLAN, QoS).
DMS Topology View parameters
Device tab parameters
Devices dropdown: Select the device type (All, SWITCH, PC, IP Camera, IP Phone, AP,
Others, or Off Line).
Snapshot icon: Use the icon to capture the displayed topology view.
File format: Select the graphics file type (SVG, PNG, or PDF).
Search box: Use the to search for a device by typing IP/MAC address or
Model/Device name.
Group tab parameters
Vlan ID: Enter a VLAN ID (VID) for the new group (1-4095).
Name: Enter a name for the new group.
OUI 1: Enter an Organizationally Unique Identifier.
OUI 2: Enter a second Organizationally Unique Identifier.
OUI 3: Enter a third Organizationally Unique Identifier.
Apply: Click when done entering the new group data.
Delete: Click to close the new group configuration dialog.