3-5.4 LLDP-MED Neighbor
This page provides a status overview of all LLDP-MED neighbors. The displayed table contains
a row for each port on which an LLDP neighbor is detected. This function applies to VoIP
devices which support LLDP-MED.
Web Interface
To show LLDP-MED neighbor:
1. Click System, LLDP, and LLDP-MED Neighbor.
2. Click Refresh for manual update web screen.
3. Click Auto-refresh for auto-update web screen.
Figure 3-5.4: The LLDP-MED Neighbor Information page
If your network without any device supports LLDP-MED then the table
will show “No LLDP-MED neighbor information found”.
Parameter description
Port: The port on which the LLDP frame was received.
Device Type: LLDP-MED Devices are comprised of two primary Device Types: Network Connectivity
Devices and Endpoint Devices.
LLDP-MED Network Connectivity Device Definition: LLDP-MED Network Connectivity Devices, as
defined in TIA-1057, provide access to the IEEE 802 based LAN infrastructure for LLDP-MED Endpoint
Devices. An LLDP-MED Network Connectivity Device is a LAN access device based on any of these
technologies:
1. LAN Switch/Router
2. IEEE 802.1 Bridge
3. IEEE 802.3 Repeater (included for historical reasons)
4. IEEE 802.11 Wireless Access Point
5. Any device that supports the IEEE 802.1AB and MED extensions defined by TIA-1057 and can
relay IEEE 802 frames via any method.
To Next Page
Loading...