3-5.5 LLDP Statistics
Two types of counters are shown. Global counters are counters that refer to the whole switch,
while Local counters refer to per port counters for the switch.
Web Interface
To show LLDP Statistics:
1. Click System, LLDP, and LLDP Statistics.
2. Click Refresh to manually update the web screen.
3. Click Auto-refresh to auto-update the web screen.
4. Click Clear to clear all counters.
Figure 3-5.5: LLDP Statistics information
Parameter descriptions:
Global Counters
Neighbor entries were last changed: Shows the time when the last entry was last deleted or added. It
also shows the time elapsed since the last change was detected.
Total Neighbors Entries Added: Shows the number of new entries added since switch reboot.
Total Neighbors Entries Deleted: Shows the number of new entries deleted since switch reboot.
Total Neighbors Entries Dropped: Shows the number of LLDP frames dropped due to the entry table
being full.
Total Neighbors Entries Aged Out: Shows the number of entries deleted due to Time-To -Live
expiring.
Local Counters: The displayed table contains a row for each port. The columns hold the following
information:
Local Port: The port on which LLDP frames are received or transmitted.
Tx Frames: The number of LLDP frames transmitted on the port.
To Next Page
Loading...