4-3 SFP Port Info
This section describes the SFP module detail information when connected to the switch.
The information includes Connector type, Fiber type, wavelength, bit rate, Vendor OUI, etc.
Web Interface
To Display the SFP information in the web interface:
1. Click Port Management and SFP Port Info.
2. View the displayed SFP Information.
Figure 4-3: The SFP Port Information page
Parameter descriptions:
Upper left scroll bar: Use to scroll to the port to display its Port statistics (e.g., “Port-25”, “Port-26”).
Connector Type: Display the connector type, for instance, SFP, SFP Plus, Reserved - LC, SC, ST, LC, etc..
Fiber Type: Display the fiber mode, for instance, Multi-Mode (MM) or Single-Mode (SM).
Tx Central Wavelength: Display the fiber optical transmitting central wavelength, for instance, 850nm,
1310nm, 1550nm, etc.
Bit Rate: Displays the nominal bit rate of the transceiver.
Vendor OUI: Displays the Manufacturer's OUI (Organizationally Unique Identifier) code which is
assigned by IEEE.
Vendor Name: Displays the company name of the module manufacturer.
Vendor P/N: Displays the product name of the naming by module manufacturer.
Vendor Rev (Revision): Displays the module revision.
Vendor SN (Serial Number): Shows the serial number assigned by the manufacturer.
To Next Page
Loading...