4-5.2 Aggregator View
To display the current port trunking information from the aggregator point of view.
Web Interface
To see the LACP detail in the web interface:
1. Click Port Management, Link Aggregation, and Aggregator View.
2. Click the Lacp Detail radio button.
Figure 4-5.2: The Aggregator View page
Parameter descriptions:
Aggregator: Shows the aggregator ID of every port. In fact, every port is also an aggregator, and its
own aggregator ID is the same as its own Port No.
Method: Show the method a port uses to aggregate with other ports.
Member Ports: Show all member ports of an aggregator (port).
Ready Ports: Show only the ready member ports within an aggregator (port).
Lacp Detail: Lets you select the port that you want to see the LACP Detail.
To Next Page
Loading...