Transition Networks SM8TAT2SA - Mac- Based Vlan

6-5 MAC-based VLAN
Navigate to Switch > VLAN Management > MAC-based VLAN > Configuration to configure new
entries and view the status of existing entries.
6-5.1 Configuration
Parameter descriptions:
Delete: To delete a private VLAN entry, check this box. The entry will be deleted during the next apply.
MAC Address: Enter the MAC address for the entry. Must be a valid unicast MAC address.
VLAN ID: Enter the VLAN ID (VID) for the entry (1-4095).
Buttons
Apply: Click to save changes.
Reset: Click to undo any changes made locally and revert to previously saved values.
Add New Entry: Click the button to add a new MAC-based VLAN member. An empty row is added to
the table, and the new member can be configured as needed.