6-6 Protocol-based VLAN
6-6.1 Protocol to Group Mapping Table
Navigate to Switch > VLAN Management > Protocol-based VLAN > Protocol to Group to display the
Protocol to Group Mapping Table. Here you can add new entries and view or edit existing table entries.
Parameter descriptions:
Delete: To delete an entry, check this box. The entry will be deleted during the next apply.
Frame Type: At the dropdown, select the Ethernet frame type (Ethernet, SNAP, or LLC).
Value: Displays a value for the frame type:
For an Ethernet frame type displays the Etype (EtherType) value: 0800,
For SNAP frame type displays the OUI in the format OUI: 0x000000 PID: 0x.
For LLC frame type displays the DSAP: 0x and SSAP: 0x.
Group Name: Displays the assigned group name for each entry.
Buttons
Apply: Click to save changes.
Reset: Click to undo any changes made locally and revert to previously saved values.
Add New Entry: Click the button to add a new entry. An empty row is added to the table, and the new
member can be configured as needed.
To Next Page
Loading...