7-8 CoS/802.1p Remarking
Use the Queues to CoS/802.1p page to remark the CoS/802.1p priority for egress traffic from
each queue.
Web Interface
To configure the Cos/802.1p Remarking in the web interface:
1. Click Quality of Service and Cos/802.1p Remarking.
2. Select CoS/802.1p.
3. Click the Apply button to save the setting.
4. To cancel the setting, click the Reset button to revert to previously saved values.
Figure 7-8: QoS Egress Queue to CoS/802.1p Remarking
Parameter descriptions:
Queue ID: Displays the Queue ID, where Queue 8 is the highest priority egress queue and Queue 1 is
the lowest priority egress queue.
CoS/802.1p: For each output queue, select the CoS/802.1p priority to which egress traffic from the
queue is remarked.
Buttons
Apply: Click to save changes.
Reset: Click to undo any changes made locally and revert to previously saved values.
To Next Page
Loading...