7-9 IP Precedence Mapping
This page lets you map an IP precedence to an egress queue.
Web Interface
To configure the IP Precedence Mapping in the web interface:
1. Click Quality of Service and IP Precedence Mapping.
2. Select Queue ID.
3. Click the Apply button to save the setting.
4. To cancel the setting, click the Reset button to revert to previously saved values.
Figure 7-9: QoS Ingress IP Precedence to Queue Mapping
Parameter descriptions:
IP Precedence: Displays the IP Precedence priority tag values to be assigned to an egress queue,
where 0 is the lowest and 7 is the highest priority.
Queue ID: Select the egress queue to which the IP precedence priority is mapped. Eight egress queues
are supported, where Queue 8 is the highest priority egress queue and Queue 1 is the lowest priority
egress queue.
Buttons
Apply: Click to save changes.
Reset: Click to undo any changes made locally and revert to previously saved values.
To Next Page
Loading...