Transmitter Solutions Firefly
TM
Type: TRAFIR390GED21K
FCC ID: SU7390GED21K
Set the twelve-digit toggle code switch to match the code set from another
functioning transmitter. Access to the Firefly
TM
toggle code switch is
achieved by removal of the back cover and battery (if necessary). Move
switches using a small pointed object, such as a paper clip, gently switching
the small switches to either the ON or OFF position. (In detail below,
switches 2, 4, 7 and 9 are in the ON position. If your or
iginal transmitter
had punch-out keys instead of switches, then set the switches in your new
transmitter to the OFF position for the keys that were punched out.) When
complete, reinstall battery and replace back cover inserting bottom clip into
front groove, then replace and tighten screw.
To Previous Page
Loading...
