2
1. Fitting the Water Heater
Mounting templates can be downloaded from the Transvend website: www.transvend.com.
Ensure that all water heaters are tted level and mounted in accordance with the instructions so that
the tap cannot be accidentally operated or knocked.
Mount the heater unit in such a way to :
• Prevent splashing onto the vehicles occupants.
• Prevent any interference with the driver.
• Prevent exposure to hosed water/jet wash devices.
• Eliminate any possibility of accidental operation/opening of any emergency door
• Allow easy access to any grab/safety handles.
• Protect it against airborne contaminants and accidental damage, a tap cover may need to be
tted depending on tting location.
Water Heater Mounting
Mount the heater to a secure vertical surface. Only use the bolts provided to screw into the heater, if
longer bolts are used they may damage electrical components within the heater.
Figure 1.1
2 litre water heater tted with standard
brackets (supplied with water heater)
Figure 1.2
2 litre water heater tted with side
mount brackets (optional accessory -
see end of manual for more images)
To Next Page
Loading...