This document is an installation and maintenance manual for a TranzX internally routed dropper seatpost and a compatible drop bar dropper lever.
Function Description:
The TranzX internally routed dropper seatpost is a bicycle component designed to allow riders to quickly adjust their saddle height while riding, without dismounting. This is particularly useful for mountain biking, where varying terrain often requires different saddle heights for optimal control and pedaling efficiency. The "internally routed" aspect means that the control cable for the dropper post runs inside the bicycle frame, providing a cleaner aesthetic and protecting the cable from damage. The accompanying drop bar dropper lever is specifically designed for use with bicycles equipped with drop handlebars, allowing for ergonomic control of the dropper post from the riding position. The system is intended to enhance rider comfort, control, and safety by enabling on-the-fly saddle height adjustments.
Important Technical Specifications (derived from installation steps):
- Lever Clamp Torque: Maximum 2Nm for positioning the dropper lever on the handlebar.
- Cable Fixing Bolt Torque: 2Nm for tightening the cable fixing bolt with a 3mm Allen wrench.
- Saddle Clamp Bolt Torque: 8-10Nm for tightening the saddle rails into the clamp with a 5mm Allen wrench.
- Cable Routing: Designed for internal routing through the downtube and up through the seat tube.
- Frame Compatibility: Exclusively for compatible frames featuring a pre-existing hole in the seat tube from the manufacturer. Crucially, the manual explicitly warns against drilling or modifying the frame in any way, as this voids the warranty and can lead to frame failure, serious injury, or death.
Usage Features:
- On-the-Fly Adjustment: The primary feature is the ability to adjust saddle height quickly and easily while riding, using the drop bar lever.
- Ergonomic Lever Placement: The lever is designed to be positioned on the drop bar, under the brake/shift lever, with the lever towards the inside of the bar, ensuring convenient access.
- Micro Adjustment: The system includes an in-line adjuster rotary ferrule on the lever, allowing for fine-tuning of cable tension and lever feel.
- Secure Cable Management: The installation process emphasizes proper routing and tensioning of the cable to ensure reliable operation.
- Saddle Angle and Position Adjustment: The saddle clamp allows for adjustment of saddle angle and fore/aft position to suit individual rider fit.
Maintenance Features:
The manual outlines several routine maintenance practices to ensure years of trouble-free performance:
- Post-Ride Cleaning: After every ride, the exposed part of the dropper post should be cleaned with a cloth.
- Air Pressure Check (if applicable): For seatposts with adjustable air pressure, the rebound speed should be checked before every ride, and air pressure added according to recommended PSI if needed.
- Avoid High-Pressure Water: Do not use high-pressure water to clean the post, as this can force water and contaminants into seals.
- Protection from Elements: Keep the post away from mud and water as much as possible.
- Storage Position: When storing the bicycle for extended periods, the dropper post should be kept in the UP (extended) position.
- No Disassembly/Modification: Users are strictly warned NOT to disassemble or cut the seatpost, as this can cause severe personal injury and voids the warranty.
- Mid Cap Tightness: The mid cap should never be loosened and must be fully tightened at all times.
- Frame Clamp Torque: Always use the lowest possible torque recommendation from the frame manufacturer when installing the seatpost into the frame.
- Professional Installation Recommended: If the user is not an experienced bicycle mechanic or encounters difficulties, they are advised to seek assistance from a professional bicycle mechanic for installation.
- Duration: The seatpost is warranted for a period of 2 years from the date of manufacture against defects in workmanship.
- Coverage: Limited to the repair or replacement of the defective part at TranzX USA's option.
- Eligibility: Applies only to the original owner and is not transferrable. Proof of purchase is required.
- Exclusions: Does not cover normal wear and tear, routine maintenance, improper installation, improper use, or modification of the seatpost.
- Voiding Warranty: Any modification of the post in any manner voids the warranty.
- Liability: TranzX USA is not responsible for incidental or individual costs not covered by the warranty. The user assumes risk for personal injury or property damage if the seatpost is modified or improperly used.
Need help?
General
To Next Page
