Travis Industries 3003 - User Manual

Travis 3003 User’s Manual
(Note: The User Manual is for Both Receiver and Transmitter)
(Receiver Model No:
3003TR / 3003TR RX)
This remote control SYSTEM offers the user a
battery-operated remote control that operates most
millivolt gas valves used in some heater rated gas
logs, gas fireplaces and other gas heating
appliances.
The transmitter operates on (2) 1.5V AAA batteries.
It is recommended that ALKALINE batteries
always be used for longer battery life and maximum
operational performance.
Before using the transmitter， install the (2) AAA
transmitter batteries into the battery compartment.
(Use caution that batteries are installed in the proper
direction)

Summary

Transmitter Key Settings

MODE Button

Changes the unit to ON, Thermo, or OFF mode positions.

UP;DOWN Buttons

Adjusts values for temperature, time, and other functions.

Function Buttons (Timer;Fan;Flame;Light)

Enables or disables functions like Timer, Fan, Flame, and Light.

OK Button

Confirms settings for temperature, time, and other functions.

Operating Modes

ON Operation

Thermo Operation

Manages temperature based on room and set points, displaying current status.

OFF Operation

Thermostat Function

Setting Desired Room Temperature

Adjusts the target temperature between 45°F and 99°F in THERMO mode.

Thermostat ON;OFF Situations

FCC Compliance and Notices

FCC Compliance Statement

Device complies with Part 15 of FCC Rules, subject to specific interference conditions.

Notice 15.21

Travis Industries 3003 Specifications

General

Brand	Travis Industries
Model	3003
Category	Remote Control
Language	English