Need help?Do you have a question about the Traxxas X-MAXX 77086 and is the answer not in the manual?
General| Brand | Traxxas |
|---|---|
| Model | X-MAXX 77086 |
| Category | Motorized Toy Car |
| Language | English |
Information on contacting Traxxas for assistance and support options.
Overview of procedures to get your model running quickly.
Instructions to register your product online for better customer service.
Explanation of icons used throughout the manual for warnings, hints, and references.
Traxxas contact information and support resources for questions and service.
Important warnings about product use, LiPo battery risks, and adult supervision requirements.
Purchaser's acceptance of responsibility and liability for model operation.
Emphasizes user responsibility for safe operation and avoiding injury.
Warnings regarding LiPo battery hazards, fire risks, and proper handling procedures.
General warnings and precautions for operating the model and using LiPo batteries.
Crucial safety guidelines for operating the model, including radio interference and safe driving practices.
Precautions for operating the electronic speed control (ESC) to prevent damage and ensure safety.
List of tools and equipment provided with the model for basic operation.
List of necessary items not included with the model for operation and maintenance.
Step-by-step instructions for removing and installing the model's body.
Identification of the motor, its cooling fans, and heat sink.
Identification of the ESC, receiver box, and related components.
Identification of key suspension arms, shocks, and drive train parts.
Emphasizes reading safety precautions for personal safety and product protection.
Instructions for charging the required LiPo battery packs.
Procedure for installing batteries into the TQi transmitter.
Instructions on how to apply additional decals to the model.
Definitions of key radio and power system terms used in the manual.
Critical precautions for handling the radio antenna wire to maintain signal range.
Specifications for the Velineon 1200XL brushless motor.
Diagram illustrating the wiring connections for the model's electronic components.
Step-by-step guide to installing AA batteries in the TQi transmitter.
Guidance on choosing and using appropriate LiPo batteries for the model.
Recommendations for selecting the correct LiPo battery charger.
Instructions for installing the LiPo battery packs into the model's compartment.
Explanation of the Traxxas Battery iD feature for automatic charger recognition.
Details on the benefits and function of the Traxxas High-Current Connector.
Essential rules for operating the radio system safely and preventing loss of control.
Basic adjustments for steering trim and the multi-function knob.
Explanation of the automatic fail-safe system for signal loss.
Instructions for operating the radio system, including throttle and steering functions.
Procedure for testing the radio system's range for reliable operation.
Steps to electronically bind the transmitter and receiver for proper communication.
Instructions for setting up and securing the receiver antenna wire.
How to activate the self-righting feature to recover from rollovers.
Technical specifications for the VXL-8s electronic speed control.
Important warnings regarding the use of LiPo batteries with the ESC.
Guide to selecting different throttle modes for varying driving conditions.
Procedure for calibrating the ESC to the transmitter for proper operation.
Steps to select Race Mode (Profile #2) for the ESC.
Steps to select Training Mode (Profile #3) for the ESC.
Explanation of ESC LED codes and protection modes for fault identification.
Indicates ESC power is on and Low-Voltage Detection is active for LiPo batteries.
Indicates Overcurrent Protection, Stage 1, requiring inspection for overgearing or damage.
Indicates Overcurrent Protection, Stage 2, causing automatic shutdown due to bound driveline.
Guidance on selecting appropriate locations for driving the X-Maxx.
Factors affecting battery run time, including battery capacity and driving style.
Recommendations for maximizing battery run time and optimizing performance.
Instructions and precautions for operating the model in wet environments.
Key precautions to take when running the model in wet or damp conditions.
Procedures for cleaning and maintaining the model after wet condition operation.
Steps for maintaining the watertight seal of the receiver box.
Instructions for removing the receiver from its box.
Steps for installing the receiver back into the receiver box.
Procedure for setting the correct gear mesh for optimal performance and to prevent damage.
Steps to re-center the steering servo before installing the servo horn.
Guide to disassembling, rebuilding, and tuning the model's shocks for optimal handling.
Checklist for inspecting the model for damage, wear, and loose components.
Periodic maintenance tasks for the Cush Drive, Chassis, Suspension, and Steering systems.
Proper procedures for storing the model when not in use.
Instructions for removing the front suspension assembly from the chassis.
Instructions for removing the rear suspension assembly from the chassis.
Chart showing recommended pinion and spur gear combinations for different performance goals.
Explanation of roll center adjustment and its effect on vehicle handling.
How changing gear ratios affects speed, temperatures, and performance.
Guide to adjusting differential oil viscosity for different driving conditions.
Steps for accessing and removing the front and rear differential units.
Instructions for draining and refilling differential oil for tuning.
Steps to restore the TQi transmitter to its original factory settings.
Explanation of the throttle trim seek mode to prevent accidental runaways.
How to adjust steering sensitivity (exponential) for precise control.
How to set servo travel limits (end points) to prevent binding.
How to precisely set the neutral point for steering and throttle servos.
Table explaining transmitter LED indicators and their meanings.
Explanation of the Traxxas Link Model Memory feature for managing multiple models.
How to activate Model Lock to prevent accidental deletion of model memory.
Instructions for deleting a model from the transmitter's memory.
Diagram showing how to navigate the TQi transmitter's settings and functions.
Steps to restore the TQi transmitter to its original factory settings.
Instructions to set the Multi-Function knob for steering sensitivity adjustment.
Instructions to set the Multi-Function knob for throttle sensitivity adjustment.
Instructions to set the Multi-Function knob for steering dual-rate adjustment.
Guide to using the Traxxas Link app for advanced transmitter programming.
How to view real-time telemetry data using sensors and the Traxxas Link app.
Explanation of how Traxxas Link Model Memory helps organize vehicles.
To Next Page