TRECE BUTLER - Assemble the Wheels; Assemble the Floor Attachment

6 pages

To Previous Page

Assembly instruction– Butler Assembly instruction– Butler

ASSEMBLE THE WHEELS: ASSEMBLE THE FLOOR ATTACHMENT

Page 5 Page 6

Attach the floor attachment between the leg and the base plate by

screwing on the leg. The floor attachment must be directed towards the

center. Then fasten the leg frame to the floor with a screw that is

suitable for the surface. (Not included)

Put on the thin washer, wheel and thick washer on the screw and

screw everything onto the short leg. Then screw on the entire wheel

set on the underside.