Do you have a question about the Tree Audio BRANCH II and is the answer not in the manual?
Controls for input level, gain selection, impedance, pad, phantom power, and source selection.
Controls for high-pass filter, low/high frequency selection, and level adjustments for EQ.
Controls for limiter engagement, gain reduction, meter selection, and output level.
Controls for powering the unit on/off and muting the audio signal.
| Channels | 2 |
|---|---|
| Type | Microphone Preamplifier |
| Tube | 12AX7 |
| Inputs | 2 x XLR |
| Outputs | 2 x XLR |
| Features | Phantom Power, High Pass Filter |