EN-4 FBx Series Bench Scale
2. INSTALLATION
2.1 Unpacking and Checking
Unpack and verify that the following components have been included:
• FBx bench scale • Instruction Manual
• Certification/Packing list • Stainless Steel platform
• Accessory pouch • Warranty Card
Retain all of the original packaging materials in the event the unit has to be
transported or stored.
2.2 Precautions
•This equipment should be used in an environment free from vibration,
temperature extremes or highly corrosive conditions.
•These factors may affect normal operation of the unit.
•Scale bases used with the FBx Indicator must be located on a stable level
surface and kept away from vibrating sources such as large machinery or
appliances.
•Adjust the leveling feet so that the bubble is centered in the circle of the
level indicator located in the rear of the scale.
Note: Ensure that the scale is level each time its location is changed.
To Next Page
Loading...
