-4-
EN - T33A
Dear Customer,
Thank you for purchasing this Trend product, we hope
you enjoy many years of creative and productive use.
Please remember to return your guarantee card within 28
days of purchase.
CAUTION:
Read the instructions before using the machine.
Definitions: Safety Guidelines
The definitions below describe the level of severity
for each signal word. Please read the manual and pay
attention to these symbols.
The following symbols are used throughout this manual:
WARNING:
indicates a potentially hazardous situation, which if not
avoided, could result in death or serious injury.
CAUTION:
Indicates a potentially hazardous situation, which, if not
avoided, may result in minor or moderate injury.
NOTICE: Indicates a practice not related to
personal injury, which, if not avoided, may result in
property damage.
Denotes risk of electric shock.
Denotes risk of fire.
Additional Symbols Used
Wear Personal Protective Equipment (PPE). Ear, eye and
respiratory protection must be worn.
Denotes risk of personal injury, loss of life or
damage to the tool in case or non-observance of the
instructions in this manual.
If you require further safety advice, technical
information or spare parts, please call Trend Technical
Support or visit www.trend-uk.com
EC DECLARATION OF CONFORMITY
MACHINERY DIRECTIVE
VACUUM CLEANER
T33A
Trend declares that the product described under
Technical Data is in compliance with 2006/42/EC.
This product also complies with Directives 2014/30/EU,
2011/65/EU and the following harmonised standards
EN 60335-2-69:2012, EN 60335-1:2012 + A11:2014 +
A13:2017 + A1:2019 + A14:2019 + A2:2019,
EN 62233:2008, EN 55014-1:2017, EN IEC 61000-3-
2:2019, EN 61000-3-3:2013+A1:2019, EN 55014-2:2015.
For more information please contact Trend at the
following address or refer to back of manual. The
undersigned make this declaration on behalf of Trend
Machinery & Cutting Tools Ltd.
Technical Director
Neil McMillan
Manufacturer
Trend Machinery &
Cutting Tools Ltd,
Unit 6 Odhams Trading Estate,
St Albans Road, Watford,
Herts, WD24 7TR, England
01.12.2020
Technical File Contact
Trend Tool Technology Ltd
3rd Floor, Kilmore House,
Park Lane,Spencer Dock,
Dublin 1, Ireland
To Next Page
Loading...