EasyManuals Logo

TRENDnet TEW-740APBO2K User Manual

TRENDnet TEW-740APBO2K
93 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #32 background imageLoading...
Page #32 background image
© Copyright 2017 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-740APBO / TEW-740APBO2K
29
AP Management Settings
Management Setup
System > Management
These settings will allow you to configure the AP system information, administrator
password, management access methods, external logging, and automatic reboot
schedule.
1. Log into your access point management page (see “Access your access point
management page” on page 28).
2. Click System and click on Management. Review the settings and click Save to apply
the changes.
System Information
System Name Specifies the device or hostname of the AP for easily
identifying the device and network management purposes.
Description Specifies a brief description of the device for easily identifying
the device and network management purposes.
Location Specifies the location of the device relative to the network for easily
identify the device and network management purposes.
Administrator Password
New/Check Admin Password To change the default administrator password,
enter the new password in the field provide and again in the check field to
confirm the password change.
Login Methods
HTTP The standard unsecured web GUI method is enabled by default. Check
the box to enable or disable management access to the device via http web GUI
access. You can also check the default port used for management access.
HTTPS This type of management access is also through the web GUI but
secured using SSL (Secure Socket Layer) encryption. The default port may also
be changed. Additionally, you can upload your own SSL certificate under Utility
> Profile Settin.
Telnet This type of unsecured management access is through the CLI
(Command Line Interface) through the AP IP address and has been disabled by
default for security purposes. The default port may also be changed.
SSH This type of secured and encrypted management access is also through
the CLI (Command Line Interface) through the AP IP address. The default port
may also be changed. For additional security, the Host Key Footprint may also
be changed by clicking Generate Key.

Table of Contents

Other manuals for TRENDnet TEW-740APBO2K

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TRENDnet TEW-740APBO2K and is the answer not in the manual?

TRENDnet TEW-740APBO2K Specifications

General IconGeneral
BrandTRENDnet
ModelTEW-740APBO2K
CategoryWireless Access Point
LanguageEnglish

Related product manuals