DNS1 IP: Enter the IP address of the primary DNS server to distribute to DHCP client
devices.
DNS2 IP: Enter the IP address of the secondary DNS server to distribute to DHCP
client devices.
WINS IP: Enter the IP address of the WINS (Windows Internet Name Service) server
to distribute to DHCP client devices. Typically this is used on a Windows network to
allow the resolution of computer and device names.
Domain: Enter the domain name to distribute to DHCP client devices. (ex.
trendnet.com)
Lease Time: Enter the time in seconds how long DHCP client devices will retain their
settings assigned by the DHCP service before expiration. Upon expiration, DHCP
client devices will initiate new requests for DHCP client settings.
After the DHCP server settings have been configured and changes have been applied,
dynamic DHCP client leases will appear in the DHCP Client List table.
To Next Page
Loading...
Need help?
General
