2
2. If you are connecting your TEW-755AP to a PoE router or switch, the device will power on
automatically. If you are connecting to a computer, or a non-PoE router or switch, you will need to
use the included power adapter.
3. To use the power adapter, plug the power adapter into the TEW-755AP, then plug the adapter
into an electrical outlet. Wait 60 seconds, then confirm that the status LEDs on the front of the
unit are illuminated. Your TEW-755AP access point is now active. The device is pre-configured to
automatically connect to your network, so no further setup is required to use the device.
4. For your security, each TEW-755AP comes pre-encrypted with a unique WiFi Name (SSID) and
WiFi Password. You can find your device's SSID and WiFi Password on the white labels located
on the device. Use this information to connect to the TEW-755AP access point. If the
TEW-755AP is reset, the SSID and WiFi Password will also be reset to the default login
credentials located on the white label.
Preset
Wireless Settings
Wi-Fi Name/SSID
Wi-Fi Password
Management Login
http://tew-755ap
username: admin
password: admin
XXXXXXXXXXXXX
(N/B/G)
TRENDnetXXX_2.4GHz_XXXX
To Next Page
Loading...
Need help?
General
