© Copyright 2015 TRENDnet. All Rights Reserved.
Wireless Profile
Wireless 2.4GHz > Wireless Network
This section outlines the available features to configure wireless 2.4GHz when Access
Point mode is selected.
1. Log into your management page (see “Access the management page” on page 16).
2. Click on the Wireless 2.4GHz
3. Underneath the basic wireless band section, you will see Wireless Network and all
your wireless network profiles will be listed.
4. Click on the Edit button next to the wireless profile you want to configure.
5. Review the wireless settings, click Apply when finished.
SSID: Enter the wireless network name (SSID) to assign to the selected wireless
profile
Hide SSID: Select option to disable the wireless network name to broadcast
Wireless MAC filter
Wireless 2.4GHz) > Wireless MAC Filter
Every network device has a unique, 12-digit MAC (Media Access Control) address. Using
wireless MAC filters, you can allow or deny specific wireless clients using this router’s
wireless network.
1. Log into your management page (see “Access the management page” on page 16).
2. Click on the Wireless 2.4GHz.
3. Review the settings and click Apply to save settings.
Filter Mode: Select from the pull down list the MAC filter rule to apply.
o Disable: Select to turn off MAC filter feature
o DENY: Select this option to DENY all listed MAC addressed
o ALLOW: Select this option to only ALLOW the listed MAC address to the the
network.
MAC Address: Enter the MAC address to apply on the MAC filter rule
MAC Filter List
MAC: List of all MAC addresses
Delete: Click to delete selected MAC address
To Next Page
Loading...
Need help?
General
