TFM-PCIV92A(B1) Microsoft Windows 7 Installation
Minimum System Requirements
Computer with an available PCI slot Version 2.2
CPU: 1GHz or above
Memory: 1GB RAM or above
Hard Driver Space: 4MB or above
Note:
1. DO NOT install the TFM-PCIV92A in the computer until instructed to do so.
2. You will need to uncompress the drivers after you download it.
3. These instructions are only for TFM-PCIV92A version B1. Version A does not support Windows 7.
1. Go to http://www.trendnet.com/downloads. From
the Select Product dropdown list, scroll down until
you see TFM-PCIV92A. Then click Go. Select
the hardware version B1, click the Windows 7
driver link and save the drivers to your computer.
2. Browse the Windows 7 folder. Go
to the x64 folder if you have 64-bit
Windows 7. Go to the x86 folder if
you have 32-bit Windows 7.
3. Double click on the Setup icon
4. Click OK.
To Next Page
Need help?
General
