8
Q1.
A1.
Q2.
A2.
Q3.
A3.
Can I connect or disconnect the USB cable while the computer is on?
Yes, you can connect or disconnect the USB cable, or any external USB
device while the computer is on becauase the USB interface if Plug-and-Play and
hot-pluggable.
I have a USB 1.1 cable, can it work with USB 2.0 devices?
Yes, it works but it may cause problems for connecting high-speed USB 2.0
external peripherals. Therefore it is recommended that you use certified USB 2.0
cable.
After successful installation of the TU2-700 USB 2.0 Hub, I connected my
external USB device to the USB port, but it doesn’t seem to work. What should I
do?
If you have an external AC power adapter that came with the external USB
device, connect the AC power adapter to the device and power on the device.
Also make sure that you have installed the correct driver for your external USB
device in Windows.
If you have any questions regarding the TU2-700 USB 2.0 Hub, please contact
Trendware Technical Support Department.
Troubleshooting
Technical Support Hours
7:00AM ~ 6:00PM, Monday through Friday
Pacific Standard Time (except holidays)
Contact Technical Support
Telephone: +1-310-626-6252
Fax: +1-310-626-6267
Website: www.TRENDNET.com
E-mail: support@trendware.com
Certifications
This equipment has been tested and found to comply with FCC and CE Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received.
Including interference that may cause undesired operation.
To Next Page
Loading...
