Need help?Do you have a question about the Trevi HONOLULU LGMF8020 and is the answer not in the manual?
Lists tools needed for assembly, not included in the box.
Details the screws and fasteners provided in the hardware kit.
Comprehensive list of all parts used in the pavilion assembly, with quantities.
Step 1 details how to connect the pavilion bases to the support columns.
Step 2 describes the assembly of the crossbeams for the pavilion structure.
Step 3 shows how to assemble the main frame of the pavilion using columns and crossbeams.
Step 4 illustrates attaching corner brackets to the main structure for stability.
Step 5 explains how to install gap covers and corner covers using hooks.
Step 6 details the installation of roof bars (part D) and connector (L) to the structure.
Step 7 shows the installation of additional roof bars (part E) connecting to the central hub.
Step 8 guides the attachment of the upper roof connector (part M) to the assembled roof structure.
Step 9 details the installation of reinforcement bars (F1, F2) to add stability to the roof frame.
Step 10 shows how to attach the main roof panels (R1, R2) and finishing pieces (G1, G2, N, P).
Step 11 details the installation of the final roof panels (Q1, Q2) and filler pieces (S).
Step 12 describes attaching the mosquito netting to the inner tracks using hooks.
Step 13 provides instructions on securely anchoring the pavilion to the ground.
Instructions for attaching optional curtain rails and curtains to the pavilion.
To Next Page
General