27
IP 365
Enabling/disabling Wi-Fi:
• Select “Wi-Fi”, the square on the left will be marked with a tick green (the Wi-Fi is activated).
• To cancel, select “Wi-Fi”, the square on the left will be taken away green check mark.
• Activating the “Wi-Fi”, the ‘IP 365 will automatically activate a search for Wi-Fi networks
available and will show on TV.
• Select the network and conrm with OK (23), if protected, enter the password clicking
the window surrounded by green and use the virtual keyboard. Using the Virtual Keyboard.
• Click on the “Connect Now” and wait until you see the message “Wi-Fi Connected”.
• You can also manually set a network if you know the SSID of the network by simply
clicking on the “Setting” - “Other” - “More settings” - “Wi-Fi” and selecting the “+”
icon.
SPECIAL FUNCTIONS
This device is equipped with features like Bluetooth, MIRACAST and MEDIA CENTER for
sending and receiving les without the use of cables.
BLUETOOTH:
IP 365 is equipped with a Bluetooth system for transmitting/receiving les between the
device and other devices with this feature.
Bluetooth Activation:
• From the main page click “Settings” - “Other” - “More settings” and select the “Bluetooth”
icon. Turn Bluetooth bringing ON the switch at the top right.
• To turn off the Bluetooth connection, turn the control to OFF.
Search devices:
• Once activated Bluetooth, the device will automatically start a search of available devices.
If you want to perform a new search, select “Search for Devices” at the top right.
• You will see a list of all devices available.
Pairing with devices:
• From the list displayed select the device to be coupled. After connection under the name
of the device will display “Connected”.
• If a PIN is required, this should be indicated in analyzer which you’re trying to pair, if
ENGLISH
To Next Page
Loading...
