Page 8Page 7
NOTE:
CHARGE TRANSMITTER
BEFORE FIRST USE.
Intensity Dial
Intensity levels: 1, 2, 3, 4, 5, 6
Line up the number you select with the round light.
“N” (no-stimulation) or “T” (tone) setting, depending on model.
“A” is for future accessories, and for Beeper operation on models other
than the Upland.
Battery Life Indicator (“Fuel Gauge”)
This light will be:
• Green when the batteries are full.
• Amber when the batteries are partly discharged.
• Red when the batteries need charging very soon.
Rapid red flashing means the batteries are completely dead
and the transmitter will not operate the collar. This light is
the guide point that indicates the selected intensity level.
The G2 and G2 EXP Field/Pro Series transmitter is waterproof.
Stimulation Buttons
Buttons vary by model. See the section “Model Guide.”
To Next Page
Loading...
