Triax TDH 700 User Manual

1
User guide
TDH 700 modules:
DVB-Satellite
DVB-Terrestrial
S

Triax TDH 700 Specifications

General

Brand	Triax
Model	TDH 700
Category	Tuner
Language	English

Summary

TDH Modules Setup Roadmap

Module Identification

Master Module with Tuner and CI Board

Identification of the Master module with tuner, CI board, and A2 stereo encoder.

Master Module with FTA Board

Identification of the Master module with tuner, FTA board, and A2 stereo encoder.

Slave Module without Tuner

Identification of the Slave module without a tuner.

Slave Module Functionality

MPEG Transport Stream Reception

Explanation of how the Slave module receives MPEG transport streams from the Master module.

MPEG Transport Stream Transfer

Description of transferring the MPEG transport stream via flat-cable to the next module.

Master and Slave Module Setup

Connecting Modules via Flatcable

Procedure for connecting Master and Slave modules using a flatcable.

Configuring Multiple Slave Modules

Connecting up to 5 slave modules to a master module.

Module Programming Procedure

Selecting Module for Programming

Guidance on selecting the module to be programmed.

Module Configuration Steps

Instructions for configuring module parameters, including channel settings.

Output Settings Configuration

Details on configuring the output settings for the module.

Input Settings for DVB-S/DVB-T

Overview of input settings for both DVB-S and DVB-T modules.

Output Settings Configuration

Selecting TV System

Procedure for selecting the TV system for output.

Selecting Output Channel

Procedure for selecting the output channel frequency.

Accessing Input Settings

Navigation path to the input settings section.

Input Settings for DVB-S Modules

LNB Type and Frequency Selection

Selecting the LNB type and input frequency.

Symbol Rate and FEC Configuration

Program and Audio Selection

Input Settings for DVB-T Modules

Input Frequency and Bandwidth

Program Search and Selection

Bit Error Rate Readout

Accessing Signal Quality Menu

Interpreting Signal Quality and BER

Understanding the signal quality percentage and Bit Error Rate (BER).

Output Level Adjustment

RF Output and Test Points

Common Output Level Adjustment

Adjusting Modulator RF Output Level

Procedure for adjusting the RF output level of each modulator without an A/V signal.

Master Module Technical Data

Master Module RF Specifications

Master Module Demodulator Specs

Master Module Decoder and Modulator Specs

Slave Module Technical Data

Slave Module Decoder and Modulator Specs