S
Stephanie SmithAug 5, 2025
How to fix weak signal on my Triax Antenna?
- RRobert FosterAug 5, 2025
Weak or missing signals in your Triax Antenna are often due to a short or missing connection in the coax cable or connectors. To troubleshoot, remove the cable from the PSU/power inserter. If the LED lights up, there's a short; repair or replace the cable. If the LED lights up on the PSU but not on the UFO, there might be a missing connection; repair or replace the cable and/or connectors. If the LED remains off, replace the PSU/power inserter.