13
Loss Test
Loss test refers to testing the fiber loss of the passive network.
Inserting the standard fiber to OLS port and OPM port, turn on the OLS and
set the reference value, then connecting the under-test fiber and check its
loss value.
Laser radiation！Do not look directly to the laser!
Operate according to the prompts.
dB
mW
82.790
-55.540
1310nm
REF:-70.00dBm
Switching
wavelength
OLS on/off
REF setting
WAVELENGTH 800-1700nm
MAXIMUM OUTPUT<1mW
CLASS II LASER PRODUCT
2020-10-01 THU 21:25
To Next Page