TRICKSTUFF® GMBH
SCHWABENMATTEN 17A
79292 PFAFFENWEILER
GERMANY
TECH-SUPPORT@TRICKSTUFF.DE SERVICE MANUAL – DIRETTISSIMA/MAXIMA PUMP V2024_02. PAGE 24 OF 27
8. Mount the pivot bolts using a HEX3mm key. New bolts are precoated with medium strength
thread locker. If you remount previously used bolts, apply medium strength thread locker (e.g.
Loctite 243).
Note: Apply thread locker to the inner threads, as shown in the picture below. This way you
avoid fixing the bearings to the pivot bolts.
To Next Page
Loading...