TRICKSTUFF® GMBH
SCHWABENMATTEN 17A
79292 PFAFFENWEILER
GERMANY
TECH-SUPPORT@TRICKSTUFF.DE SERVICE MANUAL – DIRETTISSIMA/MAXIMA PUMP V2024_02. PAGE 7 OF 27
4. Service brake pump
The following service manual includes service for the whole brake pump assembly, its disassembly
and exchange of all seals. The process is identical for Direttissima and MAXIMA brake pumps.
Preparation
1. Fix your bike in a bike stand and dismount the wheels.
2. Fully push back the caliper pistons. If you use the wooden Piston-Push-Back-Tool, first
remove the brake pads and then push back the caliper pistons. If you use the Triple-B-Tool,
first push back the caliper pistons and then remove the brake pads, to avoid damaging the
pistons. Take care not to tilt the pistons in this process, if in doubt release the applied force
and start over.