TriContinent C3000 User Manual (English)

Other manuals for TriContinent C3000

Questions and Answers:

Dawn GreenAug 1, 2025

What to do if TriContinent C3000 has no response to host commands?

M
Madison WilliamsAug 1, 2025
If your TriContinent Water Pump isn't responding to host commands, first, check the 24VDC power supply and ensure the LEDs on the pump are lit. Inspect the cables for any breaks, unconnected wires, or improperly seated connectors, ensuring connections match the pinout diagram. Also, verify that the correct COM port is selected on the host computer and that any external RS485 converter is functioning correctly. Confirm that the correct pump address and baud rate are selected, and that the execute command [R] is sent at the end of command strings.

Rebecca HancockAug 16, 2025

Why does my TriContinent Water Pump run automatically?

S
Shelby MendezAug 16, 2025
If your TriContinent Water Pump is running automatically, it might be due to an incorrect address switch setting or the AutoRun jumper not being removed. Verify the proper address switch setting and ensure the AutoRun jumper is removed.

Brand	TriContinent
Model	C3000
Category	Water Pump
Language	English

Brand

TriContinent

Model

C3000

About this manual

Introduction

Overview of the manual's purpose and scope, including contact information.

Audience

Identifies the intended readers of the manual, from experienced engineers to new users.

Products Covered by this Manual

Lists the specific C-Series Precision Syringe Pump models covered in this document.

Parts of this Manual

Provides a list of chapters and their corresponding page numbers for easy navigation.

Safety and Standards

Safety Notifications and ESD Precaution

Defines hazard alert symbols (Danger, Warning, Caution) and emphasizes ESD-sensitive equipment handling.

Proper Use of Equipment

Specifies the intended application of the pumps and emphasizes user responsibility for compatibility.

Regulatory Notices

Details compliance with FDA, CE, and RoHS regulations.

Product Overview

General Description

Introduces C-Series Precision Syringe Pumps as OEM modules for automated instrumentation.

Features and Facilities

Details the pump's capabilities, including digital I/O, communication options, and proprietary drive system.

Key Specifications

Lists critical technical parameters such as interface, communication rates, and operating conditions.

Installation Instructions

Unpacking

Provides steps for safely removing the pump from its packaging and checking contents.

Before Starting and Basic Requirements

Lists essential items and prerequisites for pump installation, including compatible syringes and software.

Protocol and Interface Options

Explains available communication protocols (OEM, DT, CAN) and interface standards (RS232, RS485, CAN).

TCS Pump Commander and USB Driver Installation

Guides users on obtaining and installing the TCS Pump Commander software and necessary USB drivers.

Power and Electrical Considerations

Details the pump's power requirements and recommendations for cabling to ensure proper operation.

Pump Placement and Mounting

Provides instructions and considerations for physically installing the pump, including orientation.

Configuration Jumpers and Address Switch

Explains how to set jumpers and the address switch for system configuration and communication.

Electrical Connections and Cabling

Details connector pin assignments and provides diagrams for RS232, RS485, and CAN bus cabling.

Confirming Pump Communication

Outlines methods to verify successful communication setup with the pump.

Pump Initialization

Describes the process of initializing the pump to set starting positions for plunger and valve.

Install Syringe

Provides a step-by-step guide for installing the syringe into the pump mechanism.

Connect Tubing

Explains how to connect the pump to fluid sources and outlets, emphasizing fluid compatibility.

Operating Instructions

Operation Overview

Introduces the basic steps of pump operation: initialization, priming, and programming moves.

Command Guidelines

Explains the structure, addressing, and syntax of pump commands for effective control.

Initializing Pumps

Details the initialization sequence and commands for setting pump and valve configurations.

Priming Syringe and Tubing

Describes the procedure for removing air from the fluid path to ensure optimal pump performance.

Valve Movements

Explains commands for controlling different types of valves and their resulting positions.

Plunger Movements

Covers commands for controlling plunger position, resolution, and speed.

Execution Control Commands

Details commands for controlling program flow, loops, delays, halts, and termination.

Using EEPROM

Explains how to store and execute command strings using the pump's EEPROM for standalone operation.

Report Commands (Query Commands)

Lists commands used to retrieve pump parameters and status information.

Status and Error Codes

Explains pump status bits and provides a list of error codes and their meanings.

Non-Functional Commands

Lists commands included for backward compatibility that have no operational function.

Command Summaries

Provides tables summarizing RS232/RS485 and CAN Bus commands for quick reference.

Maintenance

Routine Maintenance

Outlines daily and as-needed maintenance activities for ensuring pump longevity and performance.

Replacing Components

Provides procedures for replacing worn or damaged parts, specifically syringes and valves.

Replacing Syringe

Detailed instructions for removing an old syringe and installing a new one.

Replacing Valve

Step-by-step guide for removing the existing valve and installing a replacement valve.

Troubleshooting

Performing Diagnostic Self Test

Instructions on how to run the pump's built-in diagnostic self-test procedure.

Symptoms and Solutions

A table listing common pump symptoms, their potential causes, and corrective actions.

Error Code Listing

A comprehensive list of error codes, their descriptions, and recommended corrective actions.

Customer Support

Contacting Customer Service

Provides contact information for technical assistance, repair, and service globally.

Ordering Parts and Accessories

Information on how to access product details and order replacement parts or accessories.

Warranty and Return Information

Details the product warranty period and procedures for returning equipment for service.

Reference Information

Pump Addressing Scheme

Explains how pumps are identified and addressed on communication buses (RS232/485/CAN).

Communication Protocols

Details the OEM, Data Terminal (DT), and CAN interface communication protocols and message structures.

TCS Pump Commander Quick Reference Guide

A guide to the TCS Pump Commander user interface for controlling the pumps.

Material Compatibility (PTFE vs. UHMWPE)

Compares the advantages and disadvantages of PTFE and UHMWPE for seals and valve plugs.

Calculating Flow Rates

Provides guidance and tables for calculating flow rates based on syringe size and pump speed.

Chemical Compatibility Chart Information

Directs users to a chart for determining material compatibility with various fluids.

Precision and Accuracy

Defines precision and accuracy for syringe pumps and discusses factors influencing them.

Performance Optimization

Offers tips for optimizing pump and tubing performance for best results.

Dual Pump Continuous Flow Application

Describes how to configure two pumps for continuous flow operation using specific programming.

Revision History

Revision History Table

Details the revision levels and dates of changes made to the product manual.

TriContinent C3000 User Manual

Table of Contents