This document is an owner's manual for the TRINITY Basics Stainless Steel Utility Sink with Faucet, model # THA-0307. It provides detailed assembly instructions, a parts list, warnings, care and maintenance guidelines, product registration information, and contact details for customer service.

Function Description:

The TRINITY Basics Stainless Steel Utility Sink with Faucet is designed for utility purposes, offering a durable and functional washing station. It includes a sink basin, a faucet assembly, and a drain assembly, supported by four legs. The sink is intended for various tasks where a robust and easy-to-clean basin is required, such as in laundry rooms, garages, workshops, or commercial settings. The included faucet provides water supply, and the drain assembly ensures proper water disposal. The unit is designed to be freestanding but includes a wall bracket for added stability and to prevent tipping.

Important Technical Specifications:

Model Number: THA-0307
Total Weight Capacity: 300 lb
Parts List:
- SINK (A): 1 unit
- LEG (B): 4 units with feet levelers
- FAUCET ASSEMBLY (C): 1 unit with hoses
- DRAIN ASSEMBLY (D): 1 unit
- HEX SCREW (E): 8 pre-installed on sink + 2 extra (total 10)
- SCREW CAP (F): 8 units
- HEX KEY (G): 1 unit
- BRACKET (H): 1 unit
- MOUNTING SCREW (I): 2 units
- ANCHOR (J): 2 units
Drain Assembly Components: Drain, White Seal, Black Gasket, Paper Washer, 3-3/8" Nut.
Faucet Assembly Components: Faucet, Metal Base, Rubber Gasket, Metal Washer, Lock Nut w/ Screws.
Required Tools for Assembly: Phillips head screwdriver (required), pipe wrench (recommended).
Warranty: 1-year limited warranty covering defects in workmanship and materials from the date of original purchase.

Usage Features:

Easy Assembly: The manual emphasizes "FOR QUICK & EASY 3D ASSEMBLY INSTRUCTIONS" and directs users to the BILT app for interactive 3D guides. The provided instructions are step-by-step with clear diagrams.
Adjustable Feet Levelers: The legs come with feet levelers, allowing users to adjust the sink's height and ensure stability on uneven surfaces.
Wall Bracket for Stability: A wall bracket (H) is included to prevent the sink from tipping. It is crucial to note that the bracket is for stability, not for mounting the sink to the wall without legs. The sink must always be used with its legs.
Plumbing Connections: The sink requires connection to a plumbing system for water supply (faucet hoses) and drainage (drain assembly). Users are advised to ensure all plumbing connections are fully tightened to prevent leakage and to observe local plumbing and building codes. Professional installers are strongly recommended for installation.
Backflow Prevention: The equipment must be installed with adequate backflow prevention to comply with applicable federal, state, and local codes.
Drain Assembly: The drain assembly includes a white seal, black gasket, and paper washer to ensure a watertight seal when installed in the sink basin.
Faucet Installation: The faucet assembly is designed to be securely installed through a pre-drilled hole in the sink, with gaskets and a lock nut ensuring a stable and leak-free connection. The faucet handle should face the front of the sink for proper orientation.

Maintenance Features:

Stainless Steel Care: The sink is made of stainless steel, which requires specific care to maintain its appearance and prevent corrosion.
Cleaning Guidelines:
- Avoid harsh, abrasive cleaners, and other corrosive chemicals.
- Do not leave salt in the sink or near a saltwater environment.
- Rinse the surface thoroughly with hot water after using soaps and detergents containing chlorides to prevent corrosion.
- Do not use scouring pads, carbon steel brushes, or steel wool for cleaning, as iron particles left behind can lead to rust.
- Avoid using oily rags or greasy cloths when wiping the surface.
- Wipe the sink dry after use to prevent water spots.
- Use a quality stainless steel cleaner and follow its instructions.
- Always wipe ALONG the grain of the stainless steel, not against it, to prevent scratching and maintain the finish.
Part Replacement: A comprehensive "SERVICE PARTS LIST" is provided, including part numbers and descriptions for all components. This allows users to easily identify and order replacement parts from TRINITY Customer Service.
Warranty Support: The 1-year limited warranty covers defects in workmanship and materials. For service or parts, customers can contact TRINITY Customer Service via phone, fax, or email, providing the model number, purchase date, and a description of the problem. A copy of the original purchase receipt is required for service requests.

Safety Warnings:

Read and understand all instructions before assembly and use.
Do NOT modify the product in any way, as this voids the warranty and may impair safety.
Check for damaged parts before use and replace them if necessary.
Do NOT overload the product beyond its 300 lb weight capacity.
Do NOT let children climb on or in the Utility Sink.
Ensure the wall bracket is installed to prevent tipping.
Do NOT mount the sink to a wall without legs; the bracket is for stability only.
Ensure all plumbing connections are fully tightened to prevent leakage.
Professional installation is strongly recommended, adhering to local plumbing and building codes.

Trinity Basics THA-0307 - Page 2

Table of Contents