NECESSARY TOOLS
TO COMPLETE ASSEMBLY
Installation
4
No.
Tools Description /Image Application
1 Forklift Capacity over 1000 lb
Appropriated long forks attached (~65”)
Put the carrying package in the
place
2 Socket 3/4"
Install the seat module (pg.14)
3 Wrench 3/4”
Adjust the height of the cabinet
and seats (pg.9 and 14)
4 Screwdriver
no.2 (square)
(Screw #10)
Or
Phillips #2
Install the fan’s covers on to the
header(pg.10 )and the header to
the cabinet (pg. 11)
5 Screwdriver
no.3 (square)
(Screw 1/4)
Or
Phillips #3
Install the header on the cabinet
(pg.11)
To Next Page
Loading...