13
5.2: HOUND 3 Specifications
5.2.1: Amplifier
High impedance bootstrapped FET input for high gain and
sensitivity. Incorporates a bandpass filter to improve sensi-
tivity to FOX signals while suppressing 60Hz.
5.2.2: Sensitivity
Detects FOX’s tone up to 12 inches away.
5.2.3: Speaker
1-1/2" mylar coned speaker with high strength alnico mag-
net is rugged and moisture resistant.
5.2.4: Probes (2 provided)
a) Solid aluminum conical probe for low resistance contact
testing
b) Conductive Plastic duckbill probe with metal threads for
sensitive non-shorting testing.
5.2.5: Earphone Jack
Accepts standard 1/8" (3.5mm) mini phone plug, either mono
or stereo. For use with electromagnetic (dynamic) earphones
from 8 Ohms to 2000 Ohms. Automatically mutes loud-
speaker when earphone is used. An earphone with a shielded
cable is suggested to reduce the possibility of feedback from
the cable to the probe tip.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
Need help?
General